Detailed economic-technical norms on training in vocational education in Vietnam

This is a content in Circular 07/2020/TT-BLDTBXH issued by the Ministry of Labor, Invalids and Social Affairs of Vietnam, which stipulates the construction, appraisal, and issuance of economic-technical norms for training applicable in the field of vocational education in Vietnam.

Detailed  Economic-Technical  Norms  on  Training  in  Vocational  Education,  Circular  07/2020/TT-BLDTBXH

Detailed economic-technical norms on training in vocational education in Vietnam (Illustrative image)

Pursuant to Article 8 of Circular 07/2020/TT-BLDTBXH stipulates the application of one or simultaneous methods prescribed in Article 7 of Circular 07/2020/TT-BLDTBXH to establish the component norms as follows:

Regarding labor norms: Labor norms = Direct labor norms (teaching) + Indirect labor norms (management, service).

- Direct labor norms are the time spent on theoretical and practical teaching;

- Indirect labor norms are regulated as a percentage (%) of direct labor.

Regarding equipment norms:

- Determine the type of equipment;

- Determine the basic technical specifications of the equipment;

- Determine the usage time of each type of equipment;

- Summarize the equipment norms.

Equipment serving the management and service work of indirect labor at vocational education institutions are not included in the equipment norms.

Regarding material norms:

- Determine the type of materials;

- Determine the quantity/volume according to each type of material: Based on the type of equipment, the operating time of the equipment under load (material consumption);

- Determine the recovery rate (%) of materials: Based on the characteristics and nature of the materials to determine the recovery rate (%);- Determine the basic technical requirements of the materials: Describe the technical specifications of each type of material suitable for training.

Regarding facility norms:

- Usage norm of the theoretical learning area for 01 (one) student: Dlt = Slt x Tlt

Where:

- Dlt: Usage norm of the theoretical learning area for 01 (one) student during the training process (unit: m2 x hours/student).

- Slt: Average usage area of 01 (one) student in the theoretical learning area during the training process (unit: m2/student).

- Tlt: Total usage time in the theoretical learning area of 01 (one) student during the training process (unit: hours).

- Usage norm of each practical, internship, experimental area for 01 (one) student during the training process: Dth = Sth x Tth

Where:

- Dth: Usage norm of each practical, internship, experimental area for 01 (one) student during the training process (unit: m2 x hours/student).

- Sth: Average usage area of each practical, internship, experimental area for 01 (one) student during the training process (unit: m2/student).

- Tth: Total usage time of each practical, internship, experimental area for 01 (one) student during the training process (unit: hours).

- Norms for functional areas, other technical infrastructures in the school are calculated as a percentage (%) compared to the total norm of the theoretical learning area and the practical, internship, experimental area.

For details, refer to Circular 07/2020/TT-BLDTBXH, effective from October 01, 2021.

Le Vy

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem



  • Address: 19 Nguyen Gia Thieu, Vo Thi Sau Ward, District 3, Ho Chi Minh City
    Phone: (028) 7302 2286
    E-mail: info@lawnet.vn
Parent company: THU VIEN PHAP LUAT Ltd.
Editorial Director: Mr. Bui Tuong Vu - Tel. 028 3935 2079
P.702A , Centre Point, 106 Nguyen Van Troi, Ward 8, Phu Nhuan District, HCM City;