Steps for Safety Technical Inspection of Sliding Formwork Systems

01:29, 11/07/2024

On October 16, 2017, the Ministry of Construction issued Circular 11/2017/TT-BXD detailing specific steps for technical safety inspection of sliding formwork systems.

Circular 11 stipulates that for the inspection of hydraulic jacks, inspections will be carried out according to the current regulations on hydraulic lifting systems and inspection results.

For the inspection of sliding formwork systems, the inspection must be conducted sequentially according to the following steps:

- Preparation for inspection

- Check the records and equipment history;- Check the installation records.

- Conduct the inspection

- External examination;- Technical inspection - no-load test;- Technical inspection - load test.

- Handling the inspection results

See details in Circular 11/2017/TT-BXD effective from December 1, 2017.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn