Content of Technical Safety Inspection for Sliding Formwork Systems

01:37, 11/07/2024

Circular 11/2017/TT-BXD was issued by the Ministry of Construction on October 16, 2017, detailing specific contents for technical safety inspection of the sliding formwork system.

Accordingly, Circular 11 stipulates safety technical inspection for slipform systems, which must evaluate the working condition of the lifting frame, work platform, suspended scaffolding, vertical and horizontal transportation equipment, power and control electrical systems, warning devices, hydraulic systems, lightning protection systems, and the operating condition of the entire system. The inspection content is as follows:

- Inspect the hydraulic jack for lifting capacity and the structural components used in the slipform system.- Inspect the slipform system after installation at the site or periodic inspection. Safety technical inspection for the slipform system must be conducted under the direction of the inspector according to the inspection content and sequence of inspection steps.

See details of Circular 11/2017/TT-BXD, effective from December 1, 2017.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn