What are the economic and technical norms of public non-business services in Vietnam to maintain and preserve the national metrological standard system?
How is the method of building economic - technical norms in Vietnam regulated?
According to Article 4 Circular 04/2022/TT-BKHCN stipulates the method of elaboration of economic - technical norms in Vietnam as follows:
"Article 4. Method of elaboration of economic - technical norms
1. Development of economic - technical norms - Applicable techniques specified in the following legal documents:
a) Law on Measurement of 11/11/2011;
b) Decree No. 204/2004/ND-CP dated December 14, 2004 of the Government regulations on salary regime for cadres, civil servants, public employees and armed forces;
c) Decree No. 38/2019/ND-CP dated May 9, 2019 of the Government stipulating the basic salary for cadres, civil servants, public employees and armed forces;
d) Circular No. 14/2013/TT-BKHCN dated July 12, 2013 of the Minister of Science and Technology providing regulations on measurement for national standards;
dd) Circular No. 23/2013/TT-BKHCN dated September 26, 2013 of the Minister of Science and Technology providing for measurement of group 2 measuring instruments;
e) Circular No. 07 /2019/TT-BKHCN July 26, 2019 of the Minister of Science and Technology amending and supplementing a number of articles of Circular No. 23/2013/TT-BKHCN dated September 26, 2013 of the Minister of Science and Technology providing for measurement of group 2 measuring instruments;
g) Circular No. 40/2017/TT-BTC dated April 28, 2017 of the Minister of Finance regulating the regime of working-trip allowances and conference regimes;
h) Joint Circular No. 55/2015/TTLT-BTC-BKHCN dated April 22, 2015 of the Minister of Finance and the Minister of Science and Technology guiding the norms for construction, allocation of estimates and decisions. cost estimates for science and technology tasks funded with the state budget;
i) Circular No. 45/2018/TT-BTC dated May 7, 2018 of the Minister of Finance guiding the regime of management, calculation of depreciation and amortization of fixed assets at agencies, organizations and units and fixed assets assigned by the State to the enterprise for management, excluding the state capital component in the enterprise.
2. Formulating norms without specific
regulations TT-BKHCN dated December 18, 2019 of the Minister of Science and Technology stipulating the process of building economic and technical norms of public non-business services using the state budget in the field of state management of the Ministry. Science and technology.
a) General statistical method
On the basis of annual statistics or in reporting periods (statistics that ensure reliability and legality for a period of 03 (three) consecutive years prior to the date of registration; elaboration of economic - technical norms) and based on practical experience in maintaining the national metrological standard system, building a process of verification, calibration, testing of measuring instruments, measurement standards and participate in international round comparisons.
b) Standard method
On the basis of technical standards, legal regulations on working time, rest regime to develop labor norms for each job.
Pursuant to technical standards and legal regulations to determine the consumption level for each job, establish norms for equipment and materials.
c) Analytical and experimental methods
Implement survey, analysis, evaluation and experiment activities for each element constituting the norm applied to tasks in maintaining, preserving and using the standard system. national measurement; develop a process of verifying, calibrating and testing measuring instruments and measuring standards."
Thus, the method of building economic-technical norms of public non-business services uses the State budget for maintenance, preserving and using the national metrological standard system based on the above regulations
What are the economic and technical norms of public non-business services in Vietnam to maintain and preserve the national metrological standard system?
content of economic - technical norms in Vietnam?
What Circular 04/2022/TT-BKHCN stipulates the content of elaboration of economic - technical norms in Vietnam as follows:
- Contents of economic - technical norms comply with the provisions of Article 14 of Circular No. 21/2019 /TT-BKHCN dated December 18, 2019 of the Minister of Science and Technology stipulating the process of building economic and technical norms of public non-business services funded by the state budget in the field of state management of the State budget. The Ministry of Science and Technology, including the component norms as follows:
+ The labor norm is the necessary labor consumption level of an employee according to his/her expertise to complete the performance of a civil service. maintenance, preservation and use of the national metrological standard system; develop a process of verifying and calibrating measuring instruments and measuring standards to meet the prescribed criteria and standards.
Labor norm is the direct and indirect labor time required to produce a product or to perform a work step or perform a particular job and labor time during testing. product collection. In which:
* Direct labor norm is the time to complete a public non-business service. The level of waste of labor time within the norm is calculated by labor;
* The norm of indirect labor (manager, service) is set at the rate of 10 percent (%) of the direct labor norm.
Labor norm = Direct labor norm (execution) + Indirect labor norm (manager, service)
+ Machine and equipment norm is the necessary use time for each type of machine , equipment to complete a public service to maintain, preserve and use the national system of metrological standards; develop a process of verifying, calibrating and testing measuring instruments and measurement standards to meet the criteria and standards prescribed by competent agencies, the unit of calculation is ca.
+ Material norm is the consumption rate of each type of raw materials, fuel, materials and supplies necessary to complete the performance of a public non-business service and meet the criteria and standards promulgated by competent agencies. The rate of material recovery applies Circular No. 45/2018/TT-BTC dated May 7, 2018 of the Minister of Finance guiding the regime of management, calculation of depreciation and amortization of fixed assets at the agency. , organizations, units and fixed assets assigned by the State to the enterprise for management, excluding the state capital component in the enterprise and based on the actual performance of each type of consumables in recent years. required to complete the job steps.
- Total norms, application of norms
+ Economic - technical norms of public non-business services funded by the state budget on maintaining, preserving and using the national system of measurement standards; building a process of verifying, calibrating, testing measuring instruments, measuring standards is the maximum level of costs, consuming factors of labor, equipment and materials to complete a product unit or a volume of work that meets the criteria and standards prescribed by a competent authority.
+ Economic-technical norm is the norm of necessary waste of labor, machinery, equipment, and supplies to complete a product unit or a certain volume of work according to the maintenance and preservation process. and use the national system of measurement standards; process of verification, calibration and testing of measuring instruments and standards. Economic - technical norms serving the formulation of estimates and unit prices for services funded by the mode ordered by the State, tasked with providing public non-business services based on output quality or bidding to provide public non-business services.
- Agencies and organizations maintain, preserve and use the expanded national metrological standard system (in addition to the national standards specified in this Circular), based on technical requirements; conditions and actual situation of agencies, organizations and localities to apply the norm in whole or in part as prescribed in this Circular, unless otherwise prescribed."
Basis for elaboration of economic norms in Vietnam - how technical?
According to Article 6 Circular 04/2022/TT-BKHCN stipulates the basis for elaboration of economic - technical norms in Vietnam as follows:
- Economic - technical norms specified in this Circular are built on the basis of 31 implementation processes. The corresponding service has been approved, specifically:
+ The process of performing the service to maintain, preserve and use the national metrological standard Source of standard wavelength Laser He - Ne 633nm frequency stabilized by Iodine, 206/WINTER Model 100;
+ The process of performing maintenance services, preserving and using the national system of measurement standards for Flat Angles, including two standards: national standard Small flat angle and national standard Full circle flat angle;
+ Process of service maintenance, preservation and use of national measurement standards Standard weight 1kg, VIE 982100/2;
+ The process of performing service maintenance, preservation and use of national metrological standards HNG hardness standard machine - 250 scale HRC, 030-78/ HNG -250;
+ The process of performing maintenance services, preserving and using national metrological standards Calibration machine to 100 kN, V03.TB 1.20/100 kN/1000 kN-LA-KS;
+ Procedures for performing maintenance services, preserving and using national metrological standards Gas piston manometer (58784/RUSKA Model 2465A-754); Gas piston manometer, 642/ DHI Model PG 7607; Piston manometer, 49915/RUSKA Model 2485-930D; Piston manometer, 61607/RUSKA Model 2492; Differential pressure piston manometer, V04.TB1.21; V04.TB1.22/PG7202/898; PG7202/899; Ultra-low pressure piston manometer, 153/DHI Model FPG 8601;
+ Process of performing maintenance, preservation and use of national metrological standards Bell-type gas flow standard, V05.03/ CQG-LLK-01; Standard gas flow rate type PVTt, V05.04/CQG-LLK-02;
+ The process of performing maintenance services, preserving and using the national standard measurement system for volume, V05.01/CQG-DT - 13;
+ The process of performing maintenance services, preserving and using the national standard measurement system for volumetric fluid velocity, V05.02/ CQG-LTTTCL;
+ Procedures for performing maintenance services, preserving and using the system of standard equipment for water volume flow, V05.05/CQG-LLK.LN-11;
+ Procedure for performing maintenance, preservation and use of petroleum volumetric standard equipment system, V05.06/CQG-LLTTXD-02;
+ The process of performing maintenance, preservation and use of the national gas velocity measurement standard system includes two standards: standard velocity disc and Laser Dopier gas velocity measurement standard, model number: V05.07.20 ( Standard velocity disk symbol: V05.07.20.1; Laser Dopier gas velocity measurement standard symbol: V05.07.20.02);
+ Process of performing maintenance, preservation and use of the national standard measurement system Liquid density, V06.02/Density Meter DA-650;
+ Procedures for performing maintenance, preservation and use of the national metrological system Standard Capillary Viscometer, V06.01/Master Ubbelohde;
+ The process of performing maintenance, preservation and use of the national metrological standard system Zinc metal (Zn) standard solution, number: DLHH.01.20.01 Symbol: VMI.PRM.TP09.Zn ;
+ Process of performing maintenance, preservation and use of national metrological standards High frequency attenuation, V08.03/Agilent 8494B, 8496B and N5531S system;
+ Process of performing maintenance services, preserving and using the national measurement standard system Cesium Atomic Clock, 3608A01233/HP5071 A;
+ The process of performing the service of maintaining, preserving and using the national measurement standard Point Triple of Pure Water; Triple point of Pure Mercury; Melting point of pure gallium; Pour Point of Pure Tin; Pour Point of Pure Zinc; Pour Point of Pure Aluminum; Pour Point of Pure Silver; resistance ratio bridge; AC/DC standard resistors; Platinum standard resistance thermometer; High temperature standard platinum resistance thermometer;
+ The process of performing maintenance services, preserving and using the national luminous intensity measurement standard, V11.01.20/Wi41/G 0030; Wi41/G 0031; Wi41/G 0037;
+ The process of performing maintenance services, preserving and using the national luminous flux measurement standard, V11.02.20/Wi40/G 001; Wi40/G 002; Wi40/G 003;
+ The process of performing the national metrological standard service Spectroscopy, transmission spectrum V11.03.17;
+ The process of performing maintenance services, preserving and using the national luminance measurement standard V11.PR.004;
+ The process of performing the service of maintaining, preserving and using the national measurement standard of sound pressure level V12.01.17;
+ The process of performing the service of maintaining, preserving and using the national measurement standard for vibration V12.01.18;
+ Process of service maintenance, preservation and use of national measurement standards Direct voltage (DC Voltage), V07.04/Fluke 7000;
+ The process of performing maintenance services, preserving and using national measurement standards Direct current (DC Current), V07.05/ Current Shunt CS - 0.1; Current Shunt CS - 1;
+ The process of performing service maintenance, preservation and use of national measurement standards DC Resistance, V07.03/ L&N 4102-B;
+ The process of performing maintenance services, preserving and using national measurement standards Alternating voltage (AC Voltage), V07.06/ Single Junction Thermal Converter;
+ The process of performing the service of maintaining, preserving and using the national measurement standard Industrial frequency power (AC Powers)
+ The process of performing the service of maintaining, preserving and using the national measurement standard Industrial frequency electric energy (Energy)
+ Process of performing the service of building inspection, calibration, testing measuring instruments and measuring standards.
LawNet
