Vietnam: Who has the power to make conclusion on errors of measuring instruments and measurement errors?

14:55, 29/01/2019

The Ministry of Science and Technology of Vietnam issued Circular No. 18/2018/TT-BKHCN on guidelines for implementation of a number of Articles of Decree No. 119/2017/ND-CP of Vietnam’s Government on penalties for administrative violations against regulations on standards, measurement and quality of products and goods.

According to Circular No. 18/2018/TT-BKHCN of the Ministry of Science and Technology of Vietnam, conclusions on errors of measurement instruments and measurement errors may only be legally accepted if they are made by one of the following entities:

1. Measurement inspector issued with an inspector card by the Directorate for Standards; Metrology and Quality

2. Scientific and technological inspector; person responsible for conducting scientific and technological inspection

3. The chief inspector

4. Measurement authorities; measurement inspection authorities

5. Validating authorities assigned to verify the measurement instruments by the Directorate for Standards; Metrology and Quality

View relevant provisions at Circular No. 18/2018/TT-BKHCN of the Ministry of Science and Technology of Vietnam, effective from February 15, 2019.

- Thanh Lam -

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

36 lượt xem

- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn