This is one of the important contents specified in Circular No. 54/2014/TT-BGTVT promulgated on October 20, 2014 amending, supplementing some articles of the Circular No. 30/2011/TT-BGTVT dated April 15, 2011 by the Minister of Transport of Vietnam stipulating the inspection of technical safety, quality and environmental protection in manufacturing and assembling motor vehicles.
According to Circular No. 54/2014/TT-BGTVT of the Ministry of Transport of Vietnam, in-process quality control during the mass production and assembly is amended as follows:
1. After the product is granted the Certificate, the workshop shall start mass production, inspection of quality during production, assembly for each product and must ensure that all these products must meet the standard, technical regulations the same way as the product inspection dossier and certified typical sample.
2. The workshop must be responsible for origin and quality of finished products.
3. Each product from mass production must be inspected as a finished product by the workshop (hereinafter referred to as the outgoing quality assurance) in either of the following manners:
- The finished product inspection under the quality management agency’s supervision.
- Finished product self-inspection.
4. Finished product dossier for motor vehicles
- Finished product inspection note (original copy) for registration procedures;
- Finished product note (copy) for inspection procedures (first time) at motor vehicle registration centers;
- Manuals specifying key technical specifications and use of vehicle safety equipment;
- Warranty card specifying warranty conditions and addresses of warranty bases.
View details at Circular No. 54/2014/TT-BGTVT of the Ministry of Transport of Vietnam, effective from December 15, 2014.
Thuy Tram
Address: | 19 Nguyen Gia Thieu, Vo Thi Sau Ward, District 3, Ho Chi Minh City |
Phone: | (028) 7302 2286 |
E-mail: | info@lawnet.vn |