Steps to Inspect Nitroglycerin Manufacturing Equipment

01:09, 11/07/2024

Circular 119/2016/TT-BQP was issued by the Ministry of National Defense on August 30, 2016, detailing specific steps for the inspection of NitroGlyxerin generating equipment.

Circular 119 stipulates that safety technical inspection must be conducted according to the following steps:

- Step 1. Prepare for inspection;- Step 2. Check technical documents;- Step 3. External and internal inspection;- Step 4. Technical testing inspection;- Step 5. Operational inspection;- Step 6. Process inspection results.

Note:

- The subsequent steps can only be carried out if the results of the preceding step meet the requirements.- All inspection results of each step must be fully recorded in the field log and kept entirely at the inspection organization.

See details Circular 119/2016/TT-BQP effective from October 15, 2016.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn