Periodic inspection of explosion-proof transformers every 3 years

15:27, 11/07/2024

This is the content prescribed in Circular 10/2017/TT-BCT regarding 18 technical safety inspection procedures for machinery, equipment, and materials with strict requirements on labor safety.

Circular 10 stipulates that the inspection of explosion-proof transformers must be conducted periodically every 3 years. Additionally, the inspection must be carried out before putting the equipment into use and in emergency cases.

According to Circular 10, the following conditions must be met when conducting the inspection:

- The explosion-proof transformer must be in a ready state for inspection.- Documents and records of the explosion-proof transformer must be complete.- Environmental factors must not affect the inspection results.- Safety, labor hygiene, and fire prevention and fighting conditions must be met to inspect the explosion-proof transformer.

More details can be found in Circular 10/2017/TT-BCT, effective from September 15, 2017.

- Thanh Lam -

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn