Hanoi-Vietnam: Labor norms for inspection and calibration of pH measuring equipment

17:29, 11/07/2024

The Vietnam Ministry of Science and Technology issued Circular 06/2017/TT-BKHCN on economic-technical norms for inspection and calibration of measuring equipment for automatic and continuous water environment monitoring stations.

According to the new regulations, the labor norms for inspection and calibration of pH measuring equipment according to the work steps in Vietnam are specified in the following table:

Unit: Labor group/measuring equipment to be calibrated, inspected

No.	Work	Norm
1	Preparation	0.15
2	Execution	0.86
2.1	External inspection	0.07
2.2	Technical inspection	0.05
2.3	Measurement inspection	0.74
a	Error inspection	0.28
b	Reproducibility inspection	0.25
c	Stability inspection over time	0.21
3	General processing	0.65

Additionally, Circular 06 also regulates labor norms according to work steps. To be specific:

No.	Work	Grade 1 Engineer	Grade 2 Engineer	Grade 3 Engineer	Group
1	Preparation	1	1		2
2	Execution		1	2	3
3	General processing			1	1

More labor norms in other inspection activities may be found in Circular 06/2017/TT-BKHCN effective from July 1, 2017.

- Thanh Lam -

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn