Conditions for Safety Technical Inspection of Sliding Formwork Systems

01:29, 11/07/2024

This is the content stipulated in Circular 11/2017/TT-BXD issued by the Ministry of Construction on October 16, 2017, providing regulations on the technical safety inspection procedures for slip form systems.

Accordingly, Circular 11 stipulates that the following conditions must be ensured when conducting inspections:

- The slip form system must be installed on-site and ready for inspection.- The hydraulic jacks used in the system must have been individually inspected for lifting capacity and component mechanism (as per Appendix C).- The technical documentation of the slip form system must be complete as per regulations.- Environmental sanitation and weather conditions must be sufficient to ensure that they do not affect the test results.- Occupational safety and hygiene conditions must meet the requirements to operate the slip form system for inspection purposes.

See details in Circular 11/2017/TT-BXD, effective from December 1, 2017.

-Thao Uyen-

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

0 lượt xem

- This translation is generated by OpenAI's GPT-4o model;
- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn