05 requirements applied to manufacturers of pre-packed goods in Vietnam

15:50, 19/07/2014

This is a notable content mentioned in Circular No. 21/2014/TT-BKHCN on measurement of pre-packed goods issued by the Minister of Science and Technology of Vietnam on July 15, 2014.

According to Circular No. 21/2014/TT-BKHCN of the Ministry of Science and Technology of Vietnam, manufacturers of pre-packed goods shall meet the following requirements:

- The facility is established in accordance with law.

- The infrastructure satisfies the requirements below:

+ There are sufficient instruments for quantifying pre-packed goods (applied to manufacturers) or measuring instruments for assessing the conformity of pre-packed goods quantity (applied to facilities that assess the conformity themselves; the measuring instruments are inspected and calibrated periodically as prescribed;

+ The workplace, environmental conditions, and other conditions are conformable with Clause 4 of this Article.

- There are adequate technicians in charge of quantity control measures.

- Measures for quality control of measuring instruments and measuring tasks are taken to ensure fulfillment of technical measurement requirements of pre-packed goods.

- Documents about inspection and calibration results, documents about technical assessment of quantity of pre-packed goods are retained.

View details at Circular No. 21/2014/TT-BKHCN of the Ministry of Science and Technology of Vietnam, effective from August 30, 2014.

Thu Ba

>> CLICK HERE TO READ THIS ARTICLE IN VIETNAMESE

57 lượt xem

- The legal regulations in this article are according to Vietnamese Law;
- This English translation is for reference purposes only and not a definitive translation of the original Vietnamese texts;
- Articles may be compiled from a variety of sources;
- Applicable Terms may have expired at the time you are reading;
- If you have any questions about the copyright of the article, please contact us via email banquyen@lawnet.vn